Club 80-90 Forums

does anyone know what colour wires go on to what terminals on an old type Propex thermastat (it has 4 wires) Red Terminal 1 i think, Black Terminal 4 i think but what about the other 2 ?
I have a orange wire and a purple one, which one goes where on the middle 2 terminals?
Does anyone have one that they could look at or take a photo of please?

I tried the propex site but they show wiring only to a new type solid state type

Its a COMPACT 1600 Heater

Thanks
Darren

http://www.propexheatsource.co.uk/pdf/P ... ns%232.pdf" onclick="window.open(this.href);return false;

this yours i think with the orange and purple wires. the diagrams on the right hand side. can take a pic of mine if needed, but i used this when upgrading my stat. You cant go wrong really if you get orange and purple mixed up it either wont work or wont turn off so just change them around. just make sure you get red and black right way round

Thanks Lloyd
Yes i have this already but this shows a new stat
Mine is the older one with only 4 connectors on the stat

is yours the new type?

I need to know if purple is next to the red or black on the old type

Regards
Darren

Top is power input from battery
Second power output to heater
Third and Fourth Common Earth for input & output

i did mine a while back went from old type stat like above to newer propex one. for the life of me i cant remember the order of wires. propex themselves are very helpful if you ring them. I just used trial and error on the control wires and luckily got it right first time!