Page 1 of 1
Devon poptop sliding bed boards
Posted: 09 May 2010, 14:46
by ambivert
Was someone asking on here a while back about how & where the sliding bed boards fit into the Devon roof?
If so, I now have some photos which should explain how it all works, but I won't upload them unless you want them... So does anyone want them?
Re: Devon poptop sliding bed boards
Posted: 10 May 2010, 05:50
by rainman
yes please, I just have an empty space in my roof and am considering how to fit it out. Any inspiration would be welcome.
Re: Devon poptop sliding bed boards
Posted: 10 May 2010, 06:52
by ambivert
OK... hopefully will find time to upload them this eve...
Re: Devon poptop sliding bed boards
Posted: 10 May 2010, 10:46
by ermie571
me too....
Ta
Em
x
Re: Devon poptop sliding bed boards
Posted: 10 May 2010, 20:46
by ambivert
OK, so to put things into context...
With all boards removed, view from outside looking forward, note beam going across, is above rear seats...
With all boards removed, view from in the roof looking forward, see there is a bit of roof still over the cab...
With all boards removed, view from front looking backwards, see that beam above the rear seats again...
Close up of one of the channels...
With 1 board in the front, view from back, looking forwards...
With 1 board in the back, view from front, looking backwards...
With 2 boards in the front, view from back/top looking forwards/down, catch bar is usually poppered on...
With 2 boards in the front, view from back/down looking forwards/up...
HTH, let me know if you need more details on anything...
Re: Devon poptop sliding bed boards
Posted: 11 May 2010, 21:46
by dcfb77
Thank you v. much. About to start making my own frame for my demon roof (fiberglass bed base thing that goes on the tin roof) so this was useful to see the framing close up.
Thanks again, David