Page 1 of 1

fitting battery box covers

Posted: 03 May 2010, 11:29
by samk
I recently bought some original battery box covers. I presume to fit I just need small screws and washers to correspond with the small holes on the seat box. Just wanted to check there wasnt a better/ proven alternative!

Re: fitting battery box covers

Posted: 03 May 2010, 12:01
by CovKid
pop rivets?

Re: fitting battery box covers

Posted: 03 May 2010, 12:24
by samk
ooh, thanks covkid - not really thought about rivets. I dont really know how to fix them so am going to have a little google session! Easy enough ti fit though?

Re: fitting battery box covers

Posted: 03 May 2010, 13:51
by billy739
rivoted at the factory!

Re: fitting battery box covers

Posted: 03 May 2010, 14:24
by CovKid
Yup, and won't stick up like screws or catch your fingers.

Re: fitting battery box covers

Posted: 03 May 2010, 17:28
by samk
can they be taken off again fairly easy should I need to?

Re: fitting battery box covers

Posted: 03 May 2010, 17:33
by boatdog
if the covers are for your autohomes they should be wooden ones that match the woodwork of the interior they just slot in with no fixings.
If you pop rivet the covers on how do you get back in to check batteries?

Re: fitting battery box covers

Posted: 03 May 2010, 19:07
by bigherb
boatdog wrote:if the covers are for your autohomes they should be wooden ones that match the woodwork of the interior they just slot in with no fixings.
If you pop rivet the covers on how do you get back in to check batteries?

Slide the seat forward!

Re: fitting battery box covers

Posted: 03 May 2010, 19:51
by boatdog
i was only asking because i have an autohomes karisma that has swivel plates on both front seats and getting at batteries is a nightmare to get battery out from behind the drivers seat you have to turn seat fully round take off steering wheel then put seat fully forwards even then you have to force battery out against the front of seat

Re: fitting battery box covers

Posted: 04 May 2010, 16:00
by samk
I did have the Autohomes wooden ones but they were falling apart and I didnt like the casual way they just sat there! kept moving about etc. The ones I've got at the original metal ones that were fitted to caravelles etc. They are hinges so to get to the battery box you simply slide the seat forward and hinge the top up.

Re: fitting battery box covers

Posted: 04 May 2010, 21:31
by boatdog
sounds better than my way do they fit with swivel seats as well?

Re: fitting battery box covers

Posted: 04 May 2010, 21:47
by samk
i havent got swivel seats but cant see any reason why they wouldn't work. I can recommend the covers though - very neat and robust!

Re: fitting battery box covers

Posted: 04 May 2010, 22:19
by ambivert
what is all this about battery covers, aren't they meant to be exposed then, I wouldn't know a battery cover if it climbed thru the seat and bit me on the a**e

does anyone have a piccy?

Re: fitting battery box covers

Posted: 04 May 2010, 22:30
by CovKid
:rofl