Page 1 of 1
rubber seals sliding doors
Posted: 20 Apr 2010, 04:57
by edoh
where do they fit?
rubber seal and sliding door
pushed straight on to the lip?
in which case - loose fit/floppy/draughts come in -
or pushed to right hand side?
in which case - slightly less draughty - still loose -
is glue useful to hold in place?
your comments appreciated -
Re: rubber seals sliding doors
Posted: 20 Apr 2010, 21:45
by edoh
anybody with a photo of how their rubber fits on their sliding door?
Re: rubber seals sliding doors
Posted: 21 Apr 2010, 07:09
by billy739
it dosent fit on the door, it goes on the van shell!
you need to roll it it in , so the flat part goes all the way in . once you have mastered it it will need gluing as per factory!
you also need to remove the door to fit it.
Re: rubber seals sliding doors
Posted: 21 Apr 2010, 09:26
by edoh
it was all going so well - til i got to your last line!
cheers matey -
Re: rubber seals sliding doors
Posted: 21 Apr 2010, 11:29
by fix
The door isnt hard to remove but best with two people, ive done it on my own put its a pain!
Re: rubber seals sliding doors
Posted: 21 Apr 2010, 11:41
by lloydy
probably get berated for this but i cut the new seal so i didn't have to remove door, the one i took off was cut on one of the uprights. so i just copied