Page 1 of 1

Pirhana Alarm Re-Activation from Dormant

Posted: 12 Mar 2010, 19:49
by JCL
the original owner of my van used it very little and dry stored it in his garage and therefore, to avoid battery drain somehow de-activated the alarm system. It was so long ago that he had done nthis and he was 89 years of age when I made the purchase that he couldnt remember how he had done it.

Its a pirhana alarm with the interior sensors mounted underneath each grab handle on the A-pillars. He supplied me with an unusual key which must be a master key to activate the alarm however, he didnt know where in the van/dash that switch is fitted. Or alternativley maybe he merely removed a fuse to de-activate the alarm.. I would rather not involve an auto-electrician at this stage as I'm certian it is very simple......rather like me :rofl

Many thanks for any enlightening genius.

JCL (2.2 DJ AS)

Re: Pirhana Alarm Re-Activation from Dormant

Posted: 12 Mar 2010, 20:45
by ninja.turtle007
Try the back of the siren,

Re: Pirhana Alarm Re-Activation from Dormant

Posted: 12 Mar 2010, 20:46
by Damien
From experience there should be a "lock" the key fits to disable the alarm on back of siren under a rubber cover

Re: Pirhana Alarm Re-Activation from Dormant

Posted: 12 Mar 2010, 20:48
by ninja.turtle007
Damien wrote:From experience there should be a "lock" the key fits to disable the alarm on back of siren under a rubber cover


Ha Ha beat you to it!! :D

Re: Pirhana Alarm Re-Activation from Dormant

Posted: 12 Mar 2010, 21:29
by Damien
I felt a little more detail was required though :lol:

Re: Pirhana Alarm Re-Activation from Dormant

Posted: 12 Mar 2010, 21:52
by ninja.turtle007
Touché! :lol:

Re: Pirhana Alarm Re-Activation from Dormant

Posted: 13 Mar 2010, 13:22
by JCL
Many thanks to both of you, a good team effort :wink: