Page 1 of 1
Devon R&R bed foam dimensions
Posted: 08 Mar 2010, 21:15
by jiffies
Anyone mind measuring exact foam dims for Devon R&R bed? My van is waiting to have new furniture made to exact devon specs & I want to buy & cover foam in meantime
Would be very much appreciated
Cheers
Jiffies
Re: Devon R&R bed foam dimensions
Posted: 08 Mar 2010, 22:05
by fullsunian
Send me a pm tomorrow to remind me and I will measure mine when Im at work
Re: Devon R&R bed foam dimensions
Posted: 09 Mar 2010, 08:27
by syncro up
We have the Devon Moonraker.
Just getting new foam ordered myself so i've got the dimensions here.
The two parts of the seat are the same
500mm by 1070mm by 110mm
Engine cover
800mm by 1070mm by 110mm
Assuming yours are the same
Re: Devon R&R bed foam dimensions
Posted: 09 Mar 2010, 18:44
by fullsunian
fullsunian wrote:Send me a pm tomorrow to remind me and I will measure mine when Im at work
You didn't remind me and yes I forgot
Re: Devon R&R bed foam dimensions
Posted: 09 Mar 2010, 21:34
by jiffies
Thanks Chaps
Much appreciated
Re: Devon R&R bed foam dimensions
Posted: 16 Mar 2010, 12:01
by syncro up
As a guide,
We just picked our up at the weekend and it cost £135 for good quality foam.
Now weve got our bed stripped down, ive found replacing the foam on its own wont cure the step that we have between the bed and the engine bay, the plywood needs replaced as well as its bowed. this will also allow me to use thicker (1/2" to 1") stuff to get everything back on the level... and hopefully a good nights sleep.