Club 80-90 Forums

Does anyone know the part number for the handbrake cable retaining clips that bolt onto the underside of the rear trailing arms.
Cant find them on Vagcat,I need two.
Im fed up with them hanging down.
Cheers Rob.

Are you coming to Pickering Robster ? I drilled the old busted ones out on mine and put rivnuts, stainless bolts and the correct 'P' clips in. I'll do your's if ya want ?

Ian

Yes Ian I'm coming and that would be fantastic.
I shall see you there.
Rob.

Ian Hulley wrote:Are you coming to Pickering Robster ? I drilled the old busted ones out on mine and put rivnuts, stainless bolts and the correct 'P' clips in. I'll do your's if ya want ?

Ian

Ian do I need anything screws/fasteners ect.?
Had to do the old cole chisel trick to get the old screws out, they were almost welded in there.
Luckily I didn't have to drill them out,thank god it's a Westy.
Rob.

If the holes are there and good I'll just enlarge them and put a non-Westy rivnut in each side. Thus devalueing the van down to mere mortal levels

I'll bring the gear

Ian.

Cheers mate.
Rob.