Club 80-90 Forums

I have got myself a Propex X1 heater and have download the instructions from Propex and they show the gas connection is a 1/4 inch in size, now Im have trouble sourcing 1/4 inch-8mm brass adaptor so can use 8mm copper gas pipe which seems readily available where as the 1/4 inch pipe is not (unless I've been searching in the wrong place).
If anyone has retro fitted one of these units could you please give me some advice on the gas connections and fittings.

It also only has 3 wires and not 5 as shown in the instructions, Orange.Red and Black whats the score using a cheap mechanical thermostat to control the heater.

Cheers, Mark

the score is no problem with three wires
B&Q sell a nice one .. Called Sunvic, I fitted one.

as for the pipe you might be able to get an adapter 1/4 to 8mm

like this.. adapter

Orange and red together to 12v black to earth works fine !

Orange and red together to 12v black to earth works fine !

Great thanks James

as for the pipe you might be able to get an adapter 1/4 to 8mm

Nice one Kev that site is great has all the bits I need in 1/4'' too

Cheers folks