Page 1 of 1

stud paturn

Posted: 07 Feb 2010, 22:59
by toddy1970
why is my van got 5x114.3 ? is it cos its a lefty can any 1 answer

Re: stud paturn

Posted: 08 Feb 2010, 00:45
by andisnewsyncro
toddy1970 wrote:why is my van got 5x114.3 ? is it cos its a lefty can any 1 answer

Mines a LHD and it's "normal" ie 5 x 112, are you sure you're ruler is right :wink:

Re: stud paturn

Posted: 09 Feb 2010, 19:49
by jason k
or have you vauxhall or mazda wheels on it?

Re: stud paturn

Posted: 10 Feb 2010, 14:06
by toddy1970
no its def 5x114.3 thats wots on back of wheels that fit . but all the 1ns that i come across are 112,s i do know about wheel fitments cos i work in a garage so im not wrong . it just strange fitment 4 the van

Re: stud paturn

Posted: 10 Feb 2010, 20:38
by boatdog
just because its says 114mm on the wheels it doesn't mean that the van pcd is! it just means someone managed to fit 114 pcd wheels on it

Re: stud paturn

Posted: 10 Feb 2010, 22:28
by shepster
As stated all 25' s are 5x112, someone's just bodged the wrong wheels on.

Re: stud paturn

Posted: 10 Feb 2010, 22:43
by jason k
which is what i was getting at!!

Re: stud paturn

Posted: 10 Feb 2010, 22:45
by shepster
jason k wrote:which is what i was getting at!!


Possibly a bit subtle!

Re: stud paturn

Posted: 11 Feb 2010, 17:08
by jason k
:lol: :lol: could be

Re: stud paturn

Posted: 17 Feb 2010, 23:03
by Fin
How did they manage to get the Mazda wheels on?
I had a look with some rims I got for feck all - decided that I didn't want to make the rims unsalable to fit them or fudge up my Bus
they're going on the Bay and I'm getting some proper 112's

Re: stud paturn

Posted: 18 Feb 2010, 14:43
by shepster
Late Bays are 112 too so still a bodge.

Re: stud paturn

Posted: 18 Feb 2010, 18:13
by Jon o
Its not really a bodge they will fit on fine with wobble bolts/nuts, the bolt holes may have been opened slightly to fit.

Re: stud paturn

Posted: 18 Feb 2010, 20:38
by shepster
Jon o wrote:Its not really a bodge they will fit on fine with wobble bolts/nuts, the bolt holes may have been opened slightly to fit.

'nuff said!

At the end of the day it's your van mate so it's up to you.

Re: stud paturn

Posted: 18 Feb 2010, 20:40
by jason k
jeez,,,,,,,,,

i wouldnt fit wobble bolts to anything i drive.

nasty nasty bodge :shock:

Re: stud paturn

Posted: 19 Feb 2010, 00:29
by Fin
Opened up slightly :lol:
I went to 15mm dia holes, wasn't prepared to write off a perfectly good set of wheels to bodge them on.
I know our old buses ain't fast, but I want it done properly so that when I get the Scooby engine next year I won't have wheel issues :shock: