Page 1 of 1

Wire to choke unit

Posted: 05 Feb 2010, 14:51
by Cruz
On a recent inspection I noticed that the black wire from the auto choke unit on my pierburg carb is frayed where it meets the white/red connector block. Thus 12v is not going to the choke unit.

Image

Anyone know a cheap supplier of these connectors as vehicle wiring products charge £3.95 postage for a £1.50 connector

Or could I replace it for male and female insulated spade connectors?

PS. Just out of curiosity what does the wire to the choke unit do?

Re: Wire to choke unit

Posted: 05 Feb 2010, 14:55
by boatdog
as far as i know its a +12 volt feed that powers the heater strip in the auto choke as long as you feed it with 12 volts i dont suppose it matters what connector you use

Re: Wire to choke unit

Posted: 05 Feb 2010, 22:35
by Cruz
VW still list the connector for about £1 for both parts. Will probably get that as there is a van centre on the other side of town