Club 80-90 Forums

I've got Hayden from Panelkraft to paint the roof, cut the hole, fit the frame and hinge the roof. I will finish the rest off at home.
Lance sold me a second hand roof and new frame and bed kit. Lance also marked up my roof from his template.


One hole cut with the nibbler.



Lance's frame screwed into position, this is what takes the 'H' frame and bed.


Nice new hinge plates made. These fit above the head lining and slide inbetween the roof and main body.
Very pleased with this as it makes it very strong.



Three holes drilled per side and the roof bolts up spot on.


Once the luggage rack was bolted on its back to mine to start fitting the bed.
Hayden did a first class job yet again.


I trimmed under the roof with a new grey linning material, looks nice.

Fitted the alley strips to take the canvas.
Fitted the rear bed platform and the fold out bed kit, all fitted very well.
Once this was done I took it all apart for trimming and powder coat.

More photos to follow.

This is the bed removed ready for powder coat and trimming



The pop top catch powder coated and bolted in place.








The bed platform and fold out section all fitted and working well.

hi,

does the guy hayden fit these poptop roofs for anyone, if so what price does he charge for the conversion, and location

pm me with details, would like to purchase this for me van.

ta mate

Done many jobs on the bus over the past few weekends.

very,very nice job mate was that the blue gortex canvas i had ?looks fab

Hi Lance, yes mate was your canvas. Fitted a treat. Totally finished now, we are well pleased.

you have done an amazing job ,like the powdercoating