Club 80-90 Forums

I have the opportunity of a 130 TDi engine to stick in my syncro. I can get everything i need off the doner car but I dont know what 'everything' is. Can anybody give me a list?

electrics and electronics ...loads of them

And the accelerator pedal potentiometer....amongst other things

If its the PD engine, you need to speak to Doug, he'll give you the low down.

Doug .... ?

Hi Andrew
If you want to go the whole hog, that is to have a Golf MK4/Passat clad in a T25 shell then you will need the following from the donor vehicle:

Engine with all the ancillaries including starter motor, flywheel and clutch and with as much of the pipe work/ hoses/ clips etc you can get!
Intercooler - it's tucked away in the front wing somewhere
Engine management loom
ECU
Clocks - immobiliser module is in the clock
Both 'stalk' switches - wipers and lights (Cruise control?)
Barrel and keys
Dash loom - this has the connections between ECU and clocks etc
Accelerator pedal/potentiometer - you will need to buy new brake and clutch switches
Make sure you get all the relay plates etc and fuse box which is on the dash loom
I think that's about it but if in doubt I would grab everything, you can always discard it!
Doug

Sorry forgot to ask - what car is the engine from and do you know the engine code?

Thanks Doug, its from a Bora and no I dont have the code but its a 2003 model

Probably the ASZ.
Doug