Page 1 of 1
water pipe burst - heater - engine bay
Posted: 05 Jan 2010, 15:11
by Epiphone
Hi Guys,
Just 15 mins ago the a water pipe burst. Its -7 at the moment here, so made it home easily.
Its located almost under the air filter at the top right of the engine bay.
IMG_5425_small.jpg
From above
IMG_5424_small.jpg
and below
IMG_5421_small.jpg
Water resevoir IS completely emtpy.
Which pipe is this and where does it start/end?
Looking in Haynes, Im guessing at the coolant output to the Heater?
Re: water pipe burst
Posted: 06 Jan 2010, 11:01
by Ian Hulley
Re: water pipe burst
Posted: 06 Jan 2010, 11:48
by Epiphone
not sure, as I dont have the original, lost it on the road
Im not sure where this connects too, but if its a short hose, then both connecting ends should be near the area of the hole, right?
Re: water pipe burst
Posted: 06 Jan 2010, 11:58
by Ian Hulley
The 'S' shaped hose connects the right hand cylinder head towards the front of the vehicle to the black plastic bulkhead/distribution manifold jobby, this is a common hose to go due to the engine's movement and the bulkhead's lack there-of.
Ian.
Re: water pipe burst
Posted: 06 Jan 2010, 12:04
by Epiphone
yep found the other hole. thanks for the tip, it is indeed the S shape hose.
IMG_5428_small.jpg
Was able to get hold of a similar hose and got it fitted today, running fine so far
good link for identifying the connections
http://busdepot2.webappcabaret.net/details/water21.jsp
Re: water pipe burst
Posted: 22 Mar 2010, 10:46
by Epiphone
seems that this part has dissapeared from brickwerks, anyone seen this elsewhere, ive tried the normal places