Club 80-90 Forums

I have a new D2 wiring loom i want a female connector to fit the 4 pin male plug fitted to a 7 day timer.Can some one advice me where i could get one.

Try VW.

Carnt see how VW will be able to supply parts specific for ebersphacer.Answered the question myself guess i should contact ebersphacer.

need some myself. ebber obvious choise but most of these type of connectors are universal so i`m going to try one of the speciall wiring suppliers 6 pin connector with 5 wires i think. let me knoe how you get on please.

I have been on the phone this morning to various eberspacher service& parts centres.I had a return telephone call from a service engineer from one of them who said this is the first time any one had asked for the plug socket.Carnt believe that some think like trying to obtain parts like connectors would be so difficult.But i PM one of our 80 90 members of whom has been so helpfull in the reply.The part is Socket housing female 4 pin part no: 206 31 100.
Plus 4 pins part no: 206 36 018 and gave a name of this company mellor auto electrical for webasto spares & eberspacher .

Which connector - male or female?
What to?
Flat plug housing 6 pin/ Junior-Timer. For mini-timer 22 1000 32 35 00 part no.: 206 31 106
Pins for above part no.: 206 36 018

or

Socket housing male 6 pin part no.: 206 31 310

Oldiebut goodie wrote:Which connector - male or female?
What to?
Flat plug housing 6 pin/ Junior-Timer. For mini-timer 22 1000 32 35 00 part no.: 206 31 106
Pins for above part no.: 206 36 018

or

Socket housing male 6 pin part no.: 206 31 310

It is for a Eberspacher 12v/24v D2 & D4 Controller 701.10.003 7 day timer for the 4 pin male plug on it to connect to the D2 loom .What is required is a female socket.The loom i have has no plugs or sockets only the 16 pin heater connector.Thank you Oldiebut goodie

It should be as I told camper - he has quoted the parts above.
Interestingly the part that it is designed to plug into is a mini loom labeled 'switch loom' on the diagram (also has a socket for a sensor) but there is no sign of that in the catalogue.