Club 80-90 Forums

Does anyone have any pic's of how the Westy eber D2 heater unit is mounted under the van.
The mounting bars with slots in fix to something, but i cant work out where it fits to on the body work.

I am talking about the standard westy heater that sits under the van, not the newer versions of this heater.

Any help appreciated.

Cheers

I refer the honourable member to the reply I gave earlier! (brickyard)

If it's anything like my B2L and it's going back on a Westy, then there should be 4 bolts for it to go onto under the floor if you have a look. If not, then you should just see the captive nuts welded to the floor underneath and the long bolts screw through these and hang down, and they should have nuts on the end which is how you bolt it up. The captive nuts are also the same ones that the extra seat runners bolt to if you have a middle row so they should be there regardless.

Any chance of some pics of how this is mounted under the van at all.

I refer the honourable member to the reply I gave earlier! (brickyard)

Sorry no pictures - my van is in Germany and I'm in Manchester until the new year - but if you look under the sills on both sides of the van, between the front and rear cross member should be the captive nuts, 4 of them from memory.

Cheers chaps appreciated, was looking for camera pics rather than Eber diagrams.
Will have a look for the captive nuts on the van

Cheers