Club 80-90 Forums

Is there such a thing? the nice man at GFS said Justkampers did one for £15 but their site is down and I have googled but to no avail, any directions would be gratefully received

Kit, can you be a little more explicit. Do you mean the vacuum pump takeoff, a manifold takeoff or what? A piccy is worth a thousand words....

I know what he means!
But then I've got a diesel!
Don't know where else to get one though.
Try the old dog and bone for JK.

How about spilling the beans, as to what vacuum and what needs repairing... I hate these constant guessing games too Grr!

Is this "Whose Line Is It Anyway"? Can I join in - please, please

Brickworks do a new pump ! I fitted a pipe connector to mine and an inline non return valve to replace that lost when removing the plastic bit !

Oh that bit... ! Scrapper?

Sorry it is a diesel thing it runs off the engine and creates the vacuum for the servo.

JK's site is working - I've just checked.

Make sure your using good quality oil LHD rob had issuse with his and replaced it with a gen vw one to find it was all down to the oil he was using was stopping it from working proply!

I had one stop working due to low oil level.

Engine oil level? or do you mean oil in the pump itself?

Engine.

If you suspect the vac pump to be faulty what symptoms do you have ??? There is a small drilling through the drive to the pump that alows oil into the pump to seal it up, if the oil is low it cant get in there likwise if the oil is cheapo stuff it wont seal up either !