Page 1 of 1
1.9td cam belt wear
Posted: 03 Dec 2009, 22:01
by Chilla
Checked out my cam belt this evening and found that the front edge had melted rubber all the way around it. Can anyone give me an idea of the causes of this. The tensioner was set correctly.
Cheers
Re: 1.9td cam belt wear
Posted: 03 Dec 2009, 22:06
by andysimpson
Chilla wrote:Checked out my cam belt this evening and found that the front edge had melted rubber all the way around it. Can anyone give me an idea of the causes of this. The tensioner was set correctly.
Cheers
Most likely is fuel pup out of alignment. Is the belt running off the edge of cam or pump pulleys
Re: 1.9td cam belt wear
Posted: 03 Dec 2009, 22:34
by Chilla
Not sure Andy, Ill have a look to see how true its running off the pulleys
thanks !