Club 80-90 Forums

After a great day out on Saturday with Syncrospares in Devon (Thanks again!) I really have to get new HT leads fitted since mine start tracking on a damp day! let alone with the van sitting with it's butt in a Swollen Devon river!

Any one recommend where I can get a good set that will give a good seal on the spark plug.

I see these on E Bay, they are OEM and will probably fit my 2.1 MV but any advice welcome.

BOSCH Spark Leads VW Transporter T3 1.9 Syncro 85-92 Item Number:- 400074079273

Also any suggestions/products on how to seal the injectors against moisture (or the odd deluge of river water!)

Would welcome all comments.

Many Thanks

vw did do a two armed condom , like a elesticted bin bag t shirt with no neck for the disi but it's obsolete, but the leads themselves seem pretty go and well sealed, bosch or beru oem
a marigold glove can be fashioned for a disi protector
they're not bad in the water as long as intake side is good and leak free and you're sensible

Don't the air cooled boys get some plastic johnnies for the Baja's and the like? sure I've seen them somewhere, in naff colurs, usually red, come in blister packs...

coil and dissy covers

http://www.dansperformanceparts.com/bug ... uggyic.htm" onclick="window.open(this.href);return false;

I remember Bugpack doing something like what you are looking for. Was it Volkspares among others that sold them