Page 1 of 1
Alloys.....
Posted: 15 Apr 2006, 21:49
by mf11
Hi, does anyone know if these will fit my 1985 T25 high-top when I lower it by 60mm?
Stats are:
Borbet A alloys - 9x16
Offset = 15
http://cgi.ebay.co.uk/BORBET-A-DEEP-DIS ... dZViewItem
Any help would be greatly appreciated. Thanks,
M.
Posted: 15 Apr 2006, 23:02
by dubsta
NO
Wrong PCD - T25 / T3 is 5 X 112
Check out this link on Brick-Yard for possible alloys
http://194.242.159.246/brickyard/forum/ ... D=596&PN=1
Borbet A's
Posted: 20 Apr 2006, 10:07
by lhd
Definitely Not.!!!!!!!!!!
I will have a pair of these on my van tomorrow, PCD must be 5 x 112, You also must use the caps provided, as the hub nut protudes from the wheel. You will need .
extended studs, and tapered nuts for the rear,
front ones fit.
loads on ebay.de (German).
mine are 16 x 7.5 with 215's front, 16 x 9.00 with 225 rear, as fitted to the project Zwo.
cant wait to get em on
lhd...........................