Page 1 of 1
Alloys for T25
Posted: 10 Oct 2009, 15:42
by joscrivs
Hi does anyone have any idea what wheels i can put straight on my 1990 T25, or wheels and spacers i need thanks joanna.x.
Re: Alloys for T25
Posted: 10 Oct 2009, 16:00
by armyphil
there is loads of info available, just do a search for it or look on the brickyard there is a big section.
As a rule merc wheels fit but you may need longer studs/bolts
Re: Alloys for T25
Posted: 10 Oct 2009, 16:32
by hixsy
hi there, wheels that will fit as far as i know are, im sure theres more.
AUDI A series (drill out centre bore)
Porsche (need adapters, quite expensive)
All mercedes wheels (need modifcation kit and spacers 80 quid, and drill out the stud holes to 14.2)
Ford Granada scorpio wheels (not sure about the mod for that)
The easiest option is the Audi wheels, they just need the centre bore sorted and possibly spacers/new bolts. Id say the best option would be to get some 16 inchers if ya vans lowered, if ya keeping it norm ya could prob push to 18s. Mine are Mercedes C-Class sports, got em for 100, was chuft till i found out i need to spend another 150 quid on tyres and mod kit.....
good luck with it, let us know wat ya get

Re: Alloys for T25
Posted: 11 Oct 2009, 08:40
by kevtherev
armyphil wrote:there is loads of info available, just do a search for it or look on the brickyard there is a big section.
As a rule merc wheels fit but you may need longer studs/bolts
what he said^^^^
tons of info available, too much to mention