Page 1 of 1
What paint for the fiberglass top?
Posted: 04 Oct 2009, 19:23
by Helga
My pop top is starting to look messy: what paint should I use? It is the original poptop off a 1982 westfalia.
Thanks!
Re: What paint for the fiberglass top?
Posted: 05 Oct 2009, 05:09
by wee bugger
If its still the original white plastic/fibre glass, give it a couple of hours elbow grease and the results are great. a tiny bit of cream cleaner on the really stubborn bits. i spent a day once doing a high top that had not been 'seen too' for years and i was toying with the idea of painting it...i would have had to fully clean it first anyway...
Re: What paint for the fiberglass top?
Posted: 05 Oct 2009, 06:15
by eatcustard
If it does not clean up
Use Rustolium, and roller it on
Re: What paint for the fiberglass top?
Posted: 05 Oct 2009, 09:41
by High Peaker
The bloke who is currently respraying my camper (not the roof) recommended UPVC window frame cleaner.
I will try some in the next couple of weeks and let you know - unless anyone else has tryed it?..
Re: What paint for the fiberglass top?
Posted: 05 Oct 2009, 12:37
by silverbullet
I'd have thought any auto paint suitable for bumpers (or the tailgates of ghastly yank mpv's and 4x4's) would do the job ok. I think that it has to have some different plasticiser added to keep it flexible, could be wrong.
Would like to know as I will be colouring my pop top to match the bus, when I finally get to fitting it.
Re: What paint for the fiberglass top?
Posted: 05 Oct 2009, 18:15
by Helga
Thanks everybody - I like the rustoleum idea... I would just clean it... which I will anyway before painting obviously! But someone has painted it before, badly in places, so I think a coating of rustoleum is perhaps best?

Re: What paint for the fiberglass top?
Posted: 05 Oct 2009, 18:47
by wynthesurfer
Hi Helga
If you have a boat chandlers near you they are great for all things GRP,cleaners etc or look on this site
http://www.poliglow.co.uk/" onclick="window.open(this.href);return false;
Wyn
Re: What paint for the fiberglass top?
Posted: 05 Oct 2009, 21:42
by lance
if its bad after all that ,i key them up and re-gel them in white flowcoat with a bit of silica to add stippled affect