Page 1 of 1
Scooby converters... Any parts left???
Posted: 01 Oct 2009, 12:07
by toomanytoys
The frelling ehaust has just broke on my 2L legacy, looks like its gone at the 2nd cat to mid section, but all of the header looks tired.. looking for whatever might fit... Mine is a last oif the "classics" 99 (96-99 models)
Any suggestions welcome
Re: Scooby converters... Any parts left???
Posted: 02 Oct 2009, 18:54
by Pepperami
Twin port or single? I have a couple of bits left over.
Re: Scooby converters... Any parts left???
Posted: 03 Oct 2009, 20:01
by toomanytoys
Twin port heads... but its the 2nd cat thats lost a flange....
Re: Scooby converters... Any parts left???
Posted: 05 Oct 2009, 10:34
by jamesc76
You dont need the cats on it !!! It gets tested as per the year of the car and nog the year of the engine, so you can make it straight etc!
Re: Scooby converters... Any parts left???
Posted: 06 Oct 2009, 09:09
by Aidan
scooby engine in a scooby james not in a van, I know it's peverse but until it fails it's mot it'll saty in the car !
Re: Scooby converters... Any parts left???
Posted: 07 Oct 2009, 20:28
by RJES
The single port EJ22 heads are US only. They have never been used here. Simon - If you find someone with the exhaust section you need to to spare, send pictures first. There are numerous different exhaust variations I'm afraid.
Re: Scooby converters... Any parts left???
Posted: 08 Oct 2009, 10:47
by toomanytoys
Cheers chaps..
As said.. engine is still powering the leggy I use...
Spent Sat afternoon in the workshop with a bit of 3mm plate, cut 2 bits and drilled, bolted together and then whacked a 50mm hole saw through them.. chopped off some stainles bar to make the bolt/spring holders and slapped it on.. seems to be holding up... only the "olive" is a bit worse for wear and it leaks slightly...
Was offered a used 2.5 exhaust (for a measily £10, but is in southampton) look very different from mine...