Club 80-90 Forums

it's for a drill bit size.

thanks

5/8th's methinks

Really. Come on you boys at the back, pay attention!
15 divided by 25.4 precisely is ...? Anyone?
0.5906" so 19/32" comes out at 0.5938. Close as you'll get.

Thanks for reminding me that I've been meaning to look-up what AF stands for ('cos I could never work it out).

http://wiki.answers.com/Q/What_does_af_ ... rial_tools" onclick="window.open(this.href);return false;

Tony

correct ^^^
5/8 would be way too big kev. 14mm is 9/16 and one millimeter is much less than 1/8 inch

Nicola&Tony wrote:Thanks for reminding me that I've been meaning to look-up what AF stands for ('cos I could never work it out).

http://wiki.answers.com/Q/What_does_af_ ... rial_tools" onclick="window.open(this.href);return false;

Tony

american fine

Thanks lads
so a 19/32 is just over.. that's perfect

I'm after a 15mm or 19/32 HSS drill bit with a reduced shank or a tapered shank.
Big ask I know

Rozzo wrote:

Nicola&Tony wrote:Thanks for reminding me that I've been meaning to look-up what AF stands for ('cos I could never work it out).

http://wiki.answers.com/Q/What_does_af_ ... rial_tools" onclick="window.open(this.href);return false;

Tony

american fine

Oh dear, oh dear! Detention for you...

Across Flats! Don't go confusing the dimensionally challenged!

Means atrial fibrillation where I work

http://www.baconsdozen.co.uk/tools/conv ... charts.htm" onclick="window.open(this.href);return false;

kevtherev wrote:Thanks lads
so a 19/32 is just over.. that's perfect

I'm after a 15mm or 19/32 HSS drill bit with a reduced shank or a tapered shank.
Big ask I know

I`ll have a look in the "garage of rusty delights" tonight

Andy

cheers pal

I always thought it meant across flats - as in the opposite faces of a hex nut


Lend us a torque wrench Bob

Or if it slips it stands for Aw F***.

Reduced shank drills AKA blacksmiths drills

http://www.kingpoint.co.uk/blacksmith-d ... d_164.html" onclick="window.open(this.href);return false;