Club 80-90 Forums

Anyone know where I can get a set of wheel nuts to suit Mefro wheels, I understand the flange angle is different to the VW ones.

Ta.

Tim.

I run on E class rims which are the same as the Mefro wheels.
I just used the original VW nuts of my steel wheels.
I have done about 10k km with no problems.

Check a nut in the wheel see if it fits?

VW are a 14mm radius, mefros (amd mercs) require a 12mm radius.. but I run my merc rims with the std nuts..
I think Brickwerks does the correct ones.. and apparently the correct ones are available from some trailer suppliers (mefro make a lot of wheels used on trailers..

Thanks folks. Will sort something along those lines.