Page 1 of 1
Source for pulley shims
Posted: 14 Sep 2009, 19:53
by wagenbod
Hullo everybody
Does anyone know where I can get hold of some water pump pulley shims (3 holes) for my 1600 diesel (CS 1983)?
I've tried all the usual sources and can find the pulley halves ok but not the shims.
cheers
Neil
Re: Source for pulley shims
Posted: 14 Sep 2009, 21:36
by Fritz
Why not make your own or use flat washers between the two halves till you can find some,,,,,,,or last resort is to use one from a beetle.....
Regards
Fritz,,,,,,,,
Re: Source for pulley shims
Posted: 15 Sep 2009, 02:48
by wagenbod
Thanks for these ideas, Fritz. Had actually thought of making a couple out of the old pulley halves, if it comes to that.
regards, Neil
Re: Source for pulley shims
Posted: 15 Sep 2009, 08:43
by SplendiferousII
Fill in your details and then somebody locally might be able to help. I have a stack of them under my drivers seat. Take a look under your seat its a popular place to store spare belts etc. I am in Gloucester if you want o come and collect mine as I have upgraded to the newer style belts system.