Club 80-90 Forums

How long is yours?
Our van came with the kitcheny bit missing and a full width Rn`R bed which I will be narrowing by about 250mm so I can get some extra cupboard space down the side.
I`ve picked up a decent all in one hob/drainer/sink in stainless steel.Its 1050mm long by 400 wide,but when I`ve come to look at the brother in laws van his is a shade under 900mm.I`m now wondering if it will clash with the Rn`R bed opening up.Whats the max length you can get away with or has anyone come up with a cunning plan to get round it
Thanks
Mark

put your bed down, stand a piece of wood upright against the edge and measure up to the bulkhead behind drivers/passenger seat - that should give you a better idea. Not convinced a sink is worth all the hassle though. I find a washing up bowl is more practical for that kind of thing.

My Plastimo Stainless Steel combi sink/hob is 460mm by 480mm, and the work surface ihas been extended to 950mm which is 50mm over the standard size of 900mm. There is a way to overcome the clash with the bed by making the kitchen unit standard size and allowing the worksurface to extend past it at the top. I can post some pics later of how I did mine if it helps.

Covkid
Good Idea but the bed has been taken out and buried at the back of the garage behind bumpers,wheels and other T25 bits

AngeloEVS
Some pics would be good if you get time.

Thanks Chaps