Page 1 of 1
cv joint advise??
Posted: 20 Aug 2009, 16:55
by gti mad man
How do you know if there knackered got my inner ones off as im doing the gearbox .
should they be
1)freee moving and loose
2)tight but move with ease
3)clunky as in feel liek they binding?
or is there another test?
Re: cv joint advise??
Posted: 20 Aug 2009, 18:11
by Wolfsburg Willy
They are actually easier to check if they are still connected
See the Wiki.
However, since the 'box is out, you could visually inspect them, provided you want to get covered in sh*t and muck! If you have any doubts, replace them whilst you're ahead, they don't cost a fortune in the scheme of things.
Willy
Re: cv joint advise??
Posted: 23 Aug 2009, 15:29
by Aidan
strip em clean and inspect then reassemble with new grease if ok, if not replace, but old ones seem to last longer
Chappy on BY has just done it, pics on there on tech I think
Re: cv joint advise??
Posted: 23 Aug 2009, 15:37
by gti mad man
cool cheers one moves quiet freely the other kinda binds theyre in a drip tray so may as well hit them with degreaser
