2.5 Go Westy Engine
Posted: 04 Apr 2006, 11:22
Some great info on the Go Westy 2.5 Engine on there web site
http://www.gowesty.com/TwoFive_Update2.htm
And while most of us can only dream of this there is some good info that can be gleaned from there research.
97mm pistons will fit in bored out liners. (Toomanytoys start production?)
Oil jets to the piston skirts are a good idea.
Get rid of the standard Air flow meter, convert to Megersquirt or similar
My current engine spec thinking
2.1 standard bottom end with ARP rod bolts stock cam
1.4:1 ratio rockers
97mm custom pistons in bored out liners
Extractor exhaust (not found one yet)
turbo Garret lowish boost or possible eaton supercharger
I am currently at Engine in bits stage
http://www.gowesty.com/TwoFive_Update2.htm
And while most of us can only dream of this there is some good info that can be gleaned from there research.
97mm pistons will fit in bored out liners. (Toomanytoys start production?)
Oil jets to the piston skirts are a good idea.
Get rid of the standard Air flow meter, convert to Megersquirt or similar
My current engine spec thinking
2.1 standard bottom end with ARP rod bolts stock cam
1.4:1 ratio rockers
97mm custom pistons in bored out liners
Extractor exhaust (not found one yet)
turbo Garret lowish boost or possible eaton supercharger
I am currently at Engine in bits stage
