Page 1 of 1

Wishbone

Posted: 08 Aug 2009, 08:21
by The BCE
Are the parts for the wishbone (front passenger side on a RHD) the same for a syncro as a 2WD?

Just checking :oops:

Cheers,

Ben

Re: Wishbone

Posted: 08 Aug 2009, 08:32
by The BCE
14" ... forgot to mention!

Re: Wishbone

Posted: 08 Aug 2009, 08:47
by toomanytoys
You mean the upper wishbone?
and by "parts" do you mean the ball joint and bushes? if so then yes, but dont buy the cheapo ones... they dont last long..

Re: Wishbone

Posted: 08 Aug 2009, 09:07
by The BCE
Not sure! Suspension started creaking, took the van to my local trusted mechanic who sourced the bits - need to check which have been replaced!!

Just need to sort out the alignment now - drives forward in a straight line, but if I reverse with my hands off the wheel, it turns itself to one side. Have printed out the settigs from the wiki and are popping back in on Monday :roll:

Re: Wishbone

Posted: 08 Aug 2009, 09:46
by syncropaddy
Its probably the upper wishbone bushes that need to be replaced. The long bolt that holds it all together is where the camber is adjusted from so you will need to get it reset.

Re: Wishbone

Posted: 08 Aug 2009, 14:16
by The BCE
Cheers,

Ben