Page 1 of 1
hightop removing help
Posted: 06 Aug 2009, 12:50
by lance
removing a westy hitop hows it done?
Re: hightop removing help
Posted: 06 Aug 2009, 16:09
by timber technician
Bolted and bonded if i remember correctly.
Dave
Re: hightop removing help
Posted: 06 Aug 2009, 17:38
by lance
phoned loads of times to you no reply
Re: hightop removing help
Posted: 08 Aug 2009, 16:45
by timber technician
Sorry about that
We didn`t find a message on the answer machines or we would have got back to you
Are you sorted?
Re: hightop removing help
Posted: 08 Aug 2009, 18:44
by lance
yeah but steve at eastfalia explaned everything to me and roof is off going to put on a leisure drive midi hightop on tuesday any tips i know they are just sealant but which one wurths or tigerseal?
Re: hightop removing help
Posted: 08 Aug 2009, 19:31
by timber technician
We use tiger seal just make sure its all good and clean and wipe down with a cleaner panel wipe or simular
Re: hightop removing help
Posted: 08 Aug 2009, 19:53
by lance
got any idea where i can get some?
Re: hightop removing help
Posted: 09 Aug 2009, 09:55
by lloyd
timber technician wrote:We use tiger seal just make sure its all good and clean and wipe down with a cleaner panel wipe or simular
Which number is it? I need some and found they sell several different kinds.
Thanks
Re: hightop removing help
Posted: 09 Aug 2009, 17:32
by timber technician
No number on the tiger seal we use but we do get white and its available from motor factors or car paint suppliers we tend to buy in bulk because of quantities we use but they will sell what ever amount you want usually about three tubes per roof is plenty.
Dave
Re: hightop removing help
Posted: 09 Aug 2009, 17:53
by lloyd
My bad... was thinking sikaflex not tiger seal. Thanks Dave!

Re: hightop removing help
Posted: 15 Aug 2009, 07:57
by plymat
What Dave uses is good. He fitted a new roof for me with it and no problems at all!
Re: hightop removing help
Posted: 15 Aug 2009, 19:53
by lance
tiger seal was great thanks for info
