Page 1 of 1
T25 Heater Matrix Intake?
Posted: 27 Jul 2009, 10:50
by greenetribe
Please can someone tell me where the heater matrix air intake is on the T25. I have been having problem getting cold air and found the 2 side vent pipes connected to the wrong outlet port but still seem to have hot air all the time. It does vary from warm to hot with the control.
Re: T25 Heater Matrix Intake?
Posted: 27 Jul 2009, 13:11
by billy739
cold air is taken from behind the front grill.
remove it and you will see an upper middle section with a grill/mesh over it , this is the heater intake.
behind the radiator, seen from underneath with the spare tyre removed is a valve controlled by the middle heater control slider.
it switches off the water supply to the matrix , thus no air is heated and you get cold air! takes a moment to cool down once turnd off.
get some one to operate the lever and look to see the valve is moving underneath
could be broken/unclipped cable or seized valve