Page 1 of 1
Fitting instructions for Fridge
Posted: 15 Jul 2009, 09:44
by Lloydy boy
Hi, i've just had my old 81 Aircooled bus MOT'd, now it's ready for the interior to be made and fitted. I've sourced an Electrolux RM212 Fridge but need instalation instructions for it to see where vents/flue pipe etc goes. I've searched here and on Wiki but can't seem to find any, also has anyone made their own units for their van and if so did you make a frame up or did you use plywood/mdf panels screwed together? Any advice greatly recieved, Thanks Gareth
Re: Fitting instructions for Fridge
Posted: 15 Jul 2009, 09:57
by Grun
Have a look here Lloydy boy,
https://club8090.co.uk/wiki/El ... ion_manual" onclick="window.open(this.href);return false;
Mike
Re: Fitting instructions for Fridge
Posted: 15 Jul 2009, 10:12
by jamesc76
As for interior 9 or 13mm ply is fine, dont get expensive marine ply its a rip off wbp ply is great stuff!
Re: Fitting instructions for Fridge
Posted: 15 Jul 2009, 12:36
by Oldiebut goodie
jamesc76 wrote:As for interior 9 or 13mm ply is fine, dont get expensive marine ply its a rip off wbp ply is great stuff!
It isn't a rip-off for marine use, try using wbp ply in a marine environment !
Re: Fitting instructions for Fridge
Posted: 15 Jul 2009, 20:46
by Lloydy boy
Thanks for the replys folks, the manual is brilliant. Regarding the plywood what kind of finnish do you apply to it ? Paint /varnish or could you stick the Fablon type stuff on it to make it look good ?
Re: Fitting instructions for Fridge
Posted: 20 Jul 2009, 21:50
by jamesc76
I varnished mine just fine the nicest boards!
Oldiebut goodie wrote:jamesc76 wrote:As for interior 9 or 13mm ply is fine, dont get expensive marine ply its a rip off wbp ply is great stuff!
It isn't a rip-off for marine use, try using wbp ply in a marine environment !
Hence a rip off in a van!