Page 1 of 1
Help required!!! please
Posted: 28 Mar 2006, 20:43
by alden1957
I have broken my breaker bar and socket on hub nut 46mm
Can anyone loan or sell me a Heavy duty 46mm ring spanner that can be belted with a lump hammer.
or advise better method to remove rear hub nut..?
Thanks
Al
Posted: 28 Mar 2006, 23:29
by Mocki
buy a commercial one, mine is from a leyland daf, and i havent bent it yet, even with a 10ft scaffy pole and a couple of fat blokes jumping on it...
bent the scaffy pole tho!
Posted: 29 Mar 2006, 04:50
by alden1957
Thanks for reply Steve.
Do you mean buy a "commercial" hex ring spanner or breaker and socket?
Cheesrs
Al
Posted: 29 Mar 2006, 05:47
by steve8090
Al
If you can have a drive to Chester I'll crack them for you or you can take my socket and bar to do it yourself.
Posted: 29 Mar 2006, 05:57
by alden1957
Thanks for the offer Steve...will give you a ring later..Are you at your Unit today?
Cheers Al
Posted: 29 Mar 2006, 06:21
by steve8090
You don't think I'd be up this early if I wasn't working do you?
Give me a ring on 01244 288862 don't use the mobile its one of those steel units and the mobile signal just bounces around in there.