Page 1 of 1
cleaning and greasing t25 wheel bearings ..
Posted: 17 Jun 2009, 15:14
by xpress
anything to know about this before i do it on mine?
are they ok to press out or should i pick up a press/drive tool, anything else to know to make things easier?
cheers!
Re: cleaning and greasing t25 bearings ..
Posted: 17 Jun 2009, 15:30
by jamesc76
cleaning and greasing ????? if there worn there worn get new ones !
Re: cleaning and greasing t25 wheel bearings ..
Posted: 17 Jun 2009, 15:35
by xpress
obviously, if there's no rocking on the wheel bearings and just friction grinding road sound then i will grease them. otherwise will replace them with beach balls ..
Re: cleaning and greasing t25 wheel bearings ..
Posted: 17 Jun 2009, 15:38
by R0B
if you do need new ones.dont get the ones from gsf they are made of chocolate.get the ones from
http://www.brickwerks.co.uk/
Re: cleaning and greasing t25 wheel bearings ..
Posted: 17 Jun 2009, 15:58
by Red Westie
Front taper rollers? 1/2inch paint brush and a small ceramic dish with an inch of petrol in the bottom.
Clean/examine/re-pack with high melting point LM (multi purpose grease) if in any doubt replace them. Remember taper roller bearings are NOT loaded and the outter nut should just touch.
Martin
Re: cleaning and greasing t25 wheel bearings ..
Posted: 17 Jun 2009, 16:30
by xpress
cheers rob and westie.