Page 1 of 1
Fitting a West lean kit from Brickwerks
Posted: 14 Jun 2009, 19:45
by hulmey
Has anyone fitted a Westy lean kit from Brickwerks ?
Might be a stupid question but does the rubber spacer thing on the rear spring go between the body and the shim or between the shim and the spring ?
Thanks.
Re: Fitting a West lean kit from Brickwerks
Posted: 15 Jun 2009, 09:12
by toomanytoys
Quick ring to Bricky would answer it....
I would assume the rubber will still stay on the spring side.... but I know not for sure...
Re: Fitting a West lean kit from Brickwerks
Posted: 15 Jun 2009, 10:59
by hulmey
Yeah thats what I thought and how I've done it just wanted to confirm it was right thats all. Thanks anyway.
Didn't want to call Brickwerks as from the web site sounds like he's a busy man and doesn't like phone calls.
Re: Fitting a West lean kit from Brickwerks
Posted: 15 Jun 2009, 11:16
by toomanytoys
A quick call to check on one of his products you ahve bought is fine.... its the how do I find the washer bottle and change the dizzy cap that I bought from JK that he doesnt like.... which I feel is fair enough....
Re: Fitting a West lean kit from Brickwerks
Posted: 15 Jun 2009, 16:19
by jason k
rubber stays on spring side!!