Page 1 of 1
Windscreen Washer Jets
Posted: 14 Jun 2009, 11:03
by mfunsta
Morning,
Before I go ahead and break something by forcing it..
..Is there a specific way I should remove these?
do they turn and unlock or similar?
any help was always much appreciated
cheers
Re: Windscreen Washer Jets
Posted: 14 Jun 2009, 11:07
by JamesT25
grab hold of them with a pair of mole grips etc and turn them, probably wont survive but they are sold at most places to replace them!!!
Re: Windscreen Washer Jets
Posted: 14 Jun 2009, 11:10
by Titus A Duxass
Turn them an 1/8 to 1/4 and pull them out.
You will, most likely, render them useless in doing so.
Have a spare set ready, make sure that the water pipes don't fall back inside the body.
Tis a bugger of a job getting the pipes back out.
As an alternative to the standard single widdle jets you can slap in a pair of Pug 307 spray jets.
Re: Windscreen Washer Jets
Posted: 14 Jun 2009, 11:24
by mfunsta
cheers guys..
..does it make any odds whether I turn clockwise or anti-clockwise?
Re: Windscreen Washer Jets
Posted: 14 Jun 2009, 14:18
by Titus A Duxass
mfunsta wrote:cheers guys..
..does it make any odds whether I turn clockwise or anti-clockwise?
Nope, don't think so.
I did mine counterclockwise.
Re: Windscreen Washer Jets
Posted: 14 Jun 2009, 14:44
by KarlT
Its 90 degrees & they will break.