Club 80-90 Forums

Hiya, with one front wheel jacked up, how much rotational freeplay should there be at the wheel? I've got about 3cm at the tread with a fairly loud clonk at each end... normal?

Dave

0.15mm at the pinion plus 0.17mm across the diff plus a nats dadge on the splines plus the cv joints and another three sets of splines so 3cm at the outer dia is probably rightish

Cheers for that Aidan....

0.15mm at the pinion plus 0.17mm across the diff plus a nats dadge on the splines plus the cv joints and another three sets of splines so 3cm at the outer dia is probably rightish

Is that a metric nats dadge Aidan?