Page 1 of 1
anti role bar bushes replacement.
Posted: 09 May 2009, 21:12
by LUKE26
Hi guys ive just lowered my van with no brobs but on inspection i found i need to replace the anti role bar bushes. What i cant figure out is how to get them off and on again do i have to cut of the end and the re weld the end on ?
Re: anti role bar bushes replacement.
Posted: 09 May 2009, 23:27
by VWCamperfan
It does look that way at first but if you look closely you will see they are split at the top and can be slid off the anti-roll bar just by pulling downwards after the bracket has been removed.
Re: anti role bar bushes replacement.
Posted: 10 May 2009, 20:24
by lhd
Make sure you get the right sized rubbers there are two anti roll bar sizes 19mm & 21mm.
Rob.
Re: anti role bar bushes replacement.
Posted: 10 May 2009, 20:58
by Simon Baxter
And in 1982 you'll be needing the different again early set.
3 types, well 4, but isn't so common as to not bother with it.
early
late 19mm
late 21mm