Club 80-90 Forums

I was cleaning up my bus and wire brushed the rear trailing arm to find that holes were appearing.

Basicly the arm had rotted through, does anyone know where i can get a decent pair from, and how hard are they to replace.

Thanks

dridgy*

try placing an ad in the wanted forum.

just had to replace one of mine try
http://www.syncrospares.co.uk/contact_us.htm" onclick="window.open(this.href);return false;
very helpfull bloke

it was a bugger to change through the bolts holding it to the body will be rusted in the bushes
Good luck let me know if you need any advice doing it.

You'll also need the bolts as your outer one will be siezed solid and will need cutting off.
Probably means you'll need a couple of new bushes also.