Page 1 of 1
Crisis ..............
Posted: 25 Apr 2009, 09:52
by blu trukkie
Does anyone know how long the bolts are, that hold the main alternator bracket onto the engine block on 1.9 DG. This is the bracket with 2 m8 bolts under the bracket over hang. Both of mine have sheared off, so I have to try and drill and tap them out, and dont want to go through the water liner.
Thanks in anticipation.
Re: Crisis ..............
Posted: 25 Apr 2009, 10:11
by Steve T
When you drill the hole for the stud extractor, drill just deep enough for the extractor to bite, but would think that the bolt would not be in deep enough to touch anything close to the water jacket so when you drill you would know when you reached the end of the bolt, there is bound to be a deeper hole than the bolt would go in if you get what I mean. Perhaps some one will post an exact answer if they had this off recently. hope this may be of help if all else fails
Steve
Re: Crisis ..............
Posted: 25 Apr 2009, 10:22
by Tug
Hi,
I have removed sheered bolts before by Mig welding (very quickly) a Nut to the top of the sheared bolt. This has worked on occasion to remove bolts.
Glenn.
Re: Crisis ..............
Posted: 25 Apr 2009, 10:30
by Steve T
Just checked the vagcat site and actually shows them as studs....... possible part number 034903555B ???? it is not numbered so is just a guess, also no size or description as to what it relates to. If it is a stud would think it equall length, screwed into the block as protruding. but may go full depth
Steve
Re: Crisis ..............
Posted: 25 Apr 2009, 15:33
by blu trukkie
Thanks for all the help. they are bolts in my van, and sadly, they have broken off, under flush, just to make thinks more of a pain. I bought some screw extractors today, but have to wait till monday, to get my angle drill from work.
Hopefully will get there without having to pull the engine, as I need the van next weekend.