Page 1 of 1
Oil leaking from brake servo vacuum unit (or whatever its ca
Posted: 21 Apr 2009, 14:29
by benico
Not sure of its proper name but I am leaking oil from the vacuum pump(?) which gives brake servo assistance (located top right of engine) I have tried fixing with araldite but it didnt last. Brakes work but need Chris Hoyes thighs to stop quickly - also concerned about losing oil.
Does anybody know the proper name for this bit and where I could get one from.
Cheers
Ben
Re: Oil leaking from brake servo vacuum unit (or whatever its ca
Posted: 21 Apr 2009, 17:11
by Rozzo
pm lhd rob,,, i think he has a couple if its the same dervil engine
Re: Oil leaking from brake servo vacuum unit (or whatever its ca
Posted: 21 Apr 2009, 19:07
by T'Onion
its the vacuum pump like you say , you can get them from VW ,Think Rob got one £150ish ?
Where is it leaking from ? picture ?
Re: Oil leaking from brake servo vacuum unit (or whatever its ca
Posted: 21 Apr 2009, 19:41
by benico
Thanks
I ll post some pics tomoz -
£150

did nt realise it would be so pricey
Are brakes that important?!!!
Re: Oil leaking from brake servo vacuum unit (or whatever its ca
Posted: 23 Apr 2009, 22:36
by lhd
£112 new when I bought mine......
Can you see a part number on the pump? as all three types of seals on Vagcat don't say discontinued......
I think you can still buy just the top part.
N 90359001
seal / for groove: / only for:
54X2,4 1,8MM 068 145 101 EX /
N 90127101
seal / for groove: / only for:
54,5X2N 1,35MM 068 145 101 EX /
N 90415901
seal / for:
58X2 068 145 101 GX /
You can buy all three for less than a fiver so contact your local VW, or Cord Wallis dealer and see if they're still available.
If not Pm "mercdoctor", Marcus may have a good second hand one available.
That's what I would do.
If all else fails pm me as I have a brand new one in reserve, and am still using the one the infamous T'onion sent me.
It's a good idea to register with Vagcat,then you could search all this.(VW porn you know).
Just google vagcat and register, it's free and very handy when you need a part.
search under type 2 68-92
Rob.
Re: Oil leaking from brake servo vacuum unit (or whatever its ca
Posted: 24 Apr 2009, 10:25
by benico
Thanks for the info - c'est tres tres interesting our kid.
I think its just the top bit I need as its the pipe joining the top sleeve which has come away (there are no leaks out of the main unit) (see pics - click on them for full view). I was nt sure if fitting a new top bit to the main unit might not work as the older main bit may have worn etc. so the seal wouldn't be 'proper'.
DSC03826.JPG
DSC03836.JPG
Re: Oil leaking from brake servo vacuum unit (or whatever its ca
Posted: 25 Apr 2009, 21:26
by lhd
I would Pm Marcus "Mercdoctor" It's not worth Faffing around, his prices are very reasonable and I would imagine cheaper than a new top.
Rob......