Page 1 of 1
Cam belt change? when?
Posted: 06 Apr 2009, 17:00
by jones47
Hi all, I have had a look in the Wiki...I may be going daft so I apologise if this info is somwhere that I can't see!
We are newbies to this forum and are looking to buy a van .....we wondered re: timing belt changes at what mileage a 1.9 watercooled and a 2.1 fuel injection should be changed?
Many thanks. If anyone has any other advice regarding engine size or cam belts please feel free to impart your knowledge!
Cheers.
Re: Cam belt change? when?
Posted: 06 Apr 2009, 17:32
by Grun
jones47 wrote:Hi all, I have had a look in the Wiki...I may be going daft so I apologise if this info is somwhere that I can't see!
We are newbies to this forum and are looking to buy a van .....we wondered re: timing belt changes at what mileage a 1.9 watercooled and a 2.1 fuel injection should be changed?
Many thanks. If anyone has any other advice regarding engine size or cam belts please feel free to impart your knowledge!
Cheers.
Change them after the first of never.
No cam belts on the VW Petrol watercooled flat 4. None on the Aircooled either.
Diesels I believe have them.
Mike
Re: Cam belt change? when?
Posted: 06 Apr 2009, 21:31
by big red bus
As above, no vw flat 4 engine has a belt. no water cooled or any air cooled petrols all the diesel are timing belt. hope this clears up any confusion you have.
Re: Cam belt change? when?
Posted: 06 Apr 2009, 21:38
by jones47
Thanks for that! Feel a bit daft now........can i use the 'female' card on this one! LOL. Yes i am the female half of Jones47........mind you he asked me to post this question whilst he is at work!
looks like some crash courses in motor mechanics may be needed!!!!
However, so lovely to have nice replies and not to be made to feel too stupid. Thanks again.
Re: Cam belt change? when?
Posted: 07 Apr 2009, 09:18
by lloyd
jones47 wrote:......mind you he asked me to post this question whilst he is at work!
looks like some crash courses in motor mechanics may be needed!!!!
Think he was setting you up on this one.
Re: Cam belt change? when?
Posted: 07 Apr 2009, 10:00
by Red Westie
You could always come on one of our IMI courses lol.
Yup....VW flat 4 is an overhead valve engine..this means although they do have a camshaft, the opening of the valves are taken care of by the movement of push rods and not a cam belt (pretty old fashioned arrangement but then this engine design has been around a while lol)
Martin