Page 1 of 1
Dash Voltage Regulator
Posted: 31 Mar 2009, 05:14
by CycloneMike
I think mine may be a duffer.
Petrol gauge only reads half when the tank is full and the temp gauge is a bit un stable. I remember reading previously that this is symptomatic of a poorly voltage regulator.
Looking at the attached link it shouldn't cost too much to try a new one, but does anyone know which one I need or can tell me the spec so I can try and figure it out myself.
Thanks,
Mike.
http://www.maplin.co.uk/Search.aspx?cri ... &source=15" onclick="window.open(this.href);return false;
Re: Dash Voltage Regulator
Posted: 31 Mar 2009, 07:55
by Grun
VAGCAT lists..............
BASIC GERMAN PRICELIST
part number 171919803
Partnumber Title Price
171919803 REGLER 7.8 Euro
Thats all I know except AngeloEvs has a photo
In this thread showing the output as 10 volt. There are 3 connections... center is earth... left is 10 volt... right is 12 volt (battery +ve) input. As viewed from the back (windscreen side) of the panel.
Mike
Re: Dash Voltage Regulator
Posted: 31 Mar 2009, 08:24
by Red Westie
Hi there
I cannot add much more only to say I remember changing three legged voltage stabilizers on a regular basis on all sorts of VW's and Audi's late 80's early 90's. Nearly always the same symptoms.....innacurate temp and fuel gauge readings.
So the diagnosis is good, just need to get the correct one.
Martin
Re: Dash Voltage Regulator
Posted: 31 Mar 2009, 08:44
by Grun
Found this with a Google search on a U.S.A forum, can't vouch for the accuracy of the information.
Voltage Stabilizer
http://www.busdepot.com/details.jsp?par ... =171919803" onclick="window.open(this.href);return false;
If you have a good electrical componet supplier go in and ask for a
TCA700Y it is the same part
probably run you about 5 bucks....
Here is the Spec sheet on it.
Part Number = TCA700Y
Manufacturer Name = Various
Average Price = 49.88634
Description = Fixed Positive Voltage Regulator
Output Voltage Nominal (V) = 10
Load Current Max. (A) = 220m
Supply Voltage Maximum (V) = 16
Package = SIP-tab
Pins = 3
Military = N
Mike
Re: Dash Voltage Regulator
Posted: 31 Mar 2009, 18:14
by Grun
Unfortunately minimum order........ pack of 50, currently nil stock (on back order)
Mike
Re: Dash Voltage Regulator
Posted: 31 Mar 2009, 20:07
by CycloneMike
Thanks for the help.
N38CA from this page appears to do the same job but the pins are reversed. I have read elsewhere that they can be mounted "face down" as long as it is still attached to a heatsink.
http://www.maplin.co.uk/Module.aspx?Mod ... 5#features" onclick="window.open(this.href);return false;