Club 80-90 Forums

hi,had a quick look on wiki and on here but cant find out how to remove it .
anyone tell me the best way to do it or point me to the thread/wiki?

cheers..dave

Pop the cover off that goes over the guide rail (might be screwed on).
Slide the door open and release the hinge guide from the rail.
Pull the door outwards from the rear and lift it up off the rail.
Slide the lower arm out of its guide.

It's quite a bit easier with an assistant!

cheers neil,ive just done it before i read your reply..its scary how easy that is isnt it
i hope the bit where ive got to cut all the steel out from the rotten window and weld it back a good un is gonna be so simple,and hopefully get it back on tonight !!!

thanks again ...dave

I've a feeling the welding won't be quite as easy, but good luck anyway!

Ive just taken my sliding door off, id definetaly agree with an assistant i found it abit difficult to get it back on by myself!

im a professional at it now on me todd

Show off!