Page 1 of 1
Back Seat Belts in a Holdsworth Vision?
Posted: 10 Mar 2009, 18:46
by pecksa
Hi All
Any idea if it is possible to fit rear seat belts in a Holdsworth Vision?
Can see Brickwerks or Just Kampers have mounting plates, just not sure there is room!
All ideas welcomed
Pecksa
Re: Back Seat Belts in a Holdsworth Vision?
Posted: 11 Mar 2009, 14:28
by big red bus
3 point belts or lap belts?. Have a vision that has 2 lap belts fitted in the rear.
Re: Back Seat Belts in a Holdsworth Vision?
Posted: 12 Mar 2009, 13:58
by stuartt
I'd be very interested to know the answer to this one too.
I'm going to look at a 1986 holdsworth vision tomorrow with a view to buy.
Would be my first camper.
It has lap belts fitted in the back, but for the safety of my kids, I really need 3 point belts fitted.
Not sure if there is space.
The Vision is a little unusual, in that the "back" seats are sort of in the middle, with the Kitchen at the back.
Any ideas?
Re: Back Seat Belts in a Holdsworth Vision?
Posted: 12 Mar 2009, 14:22
by pecksa
Hi Big Red Bus
If your answer relates to 1991 Vision you have I think question answered. My Husband off to see you tomorrow. Looks good
Would still like to hear about 3 point belt if anyone knows?

Re: Back Seat Belts in a Holdsworth Vision?
Posted: 23 Mar 2009, 15:43
by Adrian244
I've got a Vision also with a pair of lapbelts in the rear...
However - during my rebuild I noticed that these rear seats are only screwed down to the ply floor with some self tappers

the one seat is on a pair of rails which is only held in position by a small shed type latch

so three point seat belts would be the last thing to worry about IMO.
Ade