Club 80-90 Forums

where does this mulitplug go
i bought a "complete" rear washwipe for my T3, i cannot see where to plug this in

I've not yet figured where the extra wires need to go
what am i missing
i have the stalk assembly, i thought the complete rear washwipe loom, a motor and mounting bracket, a wiper arm, a resovoir, a few 2 way plugs, and some pipe

and where does the resovoir mount, i can't see where to put it

That looks like a washer pump multi plug to me,,,,,,,,,,


Regards


Fritz,,,,,,,,,,,,

Fritz wrote:That looks like a washer pump multi plug to me,,,,,,,,,,


Regards


Fritz,,,,,,,,,,,,

ooooops, yes it does, i forgot about that

is that you in the pic with slinky black leather gloves on, Dink ?
jaylo

jaylo264 wrote:is that you in the pic with slinky black leather gloves on, Dink ?
jaylo

that's my hand, i don't own leather gloves though
the multiplug is not from the washer pump
note glove in this picture

i've loosly pugged most of the bits i can figure out together
the 3 pin plug is circled in red
another picture

I have the opposite connector in my bus, just behind the fusebox in amongst the Kabelsalat (German version of leccy spaghetti) that lurks there.

HI Dink. when I wired mine in I rewired right to the fuse box, as Titus said there is a connector there from the switch I fixed a new connector in its place. You will also need a relay No 74 or78 I think???? The water tank should go on the left side at the rear But I put mine in the small cupboard on the right as mine is panelled out.
Hope this is of some use . Hobopatch.

i put the watertank (from our old rover) on the rear beam in the engine bay , bolted thru behind the number plate "wings", pipe goes up the air inlet thingy to the top of the tailgate ; its a gert big tank so plan to fill it when i do me weekly checks .
jaylo

Hi Dink, I got it wrong about the relay it should be No 72 NOT as I said yesterday, hope this as not been a prob very sorry.Hobopatch

Where abouts in the fuse/relay box does #72 plug into