Club 80-90 Forums

... I need some!

I've started sketching how I plan to full redo my interior, but im struggling to find a layout I like.

If people could post a quick snap of their interiors so I can pool some idea's together, I'd be very grateful


thanks

try here
http://www.camperinterior.co.uk/" onclick="window.open(this.href);return false;

i did this last night mate. i simply went onto google images and did vw interior..... then if u try t25 a few good ones come up!

basiclly i reckon that if your building from scratch then the most common idea is units along one side and 3/4 rock and roll bed. thats wat im in planning at the min!

More specifically for photos try here:
http://www.camperinterior.webfotos.co.uk/" onclick="window.open(this.href);return false;

There is a link to it from earlier site mentioned but this takes you straight to the gallery
Cheers,
Dave

thanks guys

hi mate

i designed my own interior for my panel van, used google sketch up. it's a great 3d design program, takes some practice but is worth it in the end.

http://sketchup.google.com/" onclick="window.open(this.href);return false;

use this link it downloads really quick and more importantly is FREE lol

Hi Richard,
I run the http://www.camperinterior.co.uk" onclick="window.open(this.href);return false; site where I have some plans for camper interiors but dont have much for T25 yet.
The plans I have are near the bottom of this page and hope to add some more soon.

http://www.camperinterior.co.uk/html/ma ... iture.html" onclick="window.open(this.href);return false;

If you still have the plans that you made for your panel van and you dont mind sharing them with others feel free to send me a copy and I will post them up.

Or if anyone else reading has anything same goes

Cheers,
Dave

i made my own and am quite impressed with it.you need to work out where your fridge ,sink,cooker are going to fit then work out the minimum depth the units need to be to give you more room for the bed..if ya going the 3/4 route
i made the first unit the kitchen one..made the front panel first ,fridge to the left sink above and cooker to the right with a cupboard underneath..made it as shallow as i could and then made the rear wardrobe the same depth


that left a gap in the middle

so i built the gas cupboard there

these are a bit old,its nearly finished now
ill get some pics up tomoz when its lighter of how it looks now

.

I'd say your first thing you want to think about is....Full width or 3/4 width bed, then work your cupboards etc around that.

Heres mine, made from scratchand as we went along. PLease with outcome. Took about 2 months to build,fit and including all electrics,12v+240v.

DaveyP2004 wrote:Hi Richard,
I run the http://www.camperinterior.co.uk" onclick="window.open(this.href);return false; site where I have some plans for camper interiors but dont have much for T25 yet.
The plans I have are near the bottom of this page and hope to add some more soon.

http://www.camperinterior.co.uk/html/ma ... iture.html" onclick="window.open(this.href);return false;

If you still have the plans that you made for your panel van and you dont mind sharing them with others feel free to send me a copy and I will post them up.

Or if anyone else reading has anything same goes

Cheers,
Dave

Super that Dave! Thanks

I'll get the plans scaled out and done into autocad files and PDF

Might have a messabout with that sketchup

big red bus..... very nice interior mate if mine is anything as tidy as that ill be happy!

big red bus,

I have to agree that is a nice job, i am re doing my interior our bus is the asame colour as yours we will be going along a similar design to yours, good work