Page 1 of 1

Exhaust Dilemma.... Go stainless???

Posted: 28 Feb 2009, 10:36
by wasserleaker
Hi all!
i replaced the pipework on my 2.1 about 18mnths ago, the silencer still looked ok, so left the old one, and now the pipework is really starting to flake off pieces of rust quite badly! (it's a JK one)
now the silencer is blowing a bit from a crack near the tailpipe end, so i'm debating wether to just replace the silencer, and stick with the steel pipework for now, or go for one of the full stainless systems, LA Performance, or VW Speedshop
the idea of having to fit a smaller oil filter worries me a bit, though i always change it every oil change, so are the shorter polo type ok?
any opinions from anyone with either of these systems fitted, or any other stainless ones that are available, would be great, if steel versions only last a couple of years, i'm coming round to the idea that stainless is going to be less hassle in the long run, are either of these systems any noisier than a std set up? wouldn't mind it a bit fruitier sounding, but not overly noisy so it becomes annoying on long journeys,
many thanks for any replies! :D
wasserleaker

Re: Exhaust Dilemma.... Go stainless???

Posted: 28 Feb 2009, 10:39
by Ian Hulley
The JP system (from Macclesfield) is no louder than the standard system .... or at least our's isn't.

Ian.

Re: Exhaust Dilemma.... Go stainless???

Posted: 28 Feb 2009, 10:57
by Mocki
brickyard is, so im told doing a fulll stainless sys that is bit by bit interchangeable with the standard, so you dont need to replace all in one go..... ill be looking at this verrrry soon.

Re: Exhaust Dilemma.... Go stainless???

Posted: 28 Feb 2009, 11:52
by phredd
Mocki wrote:brickyard is, so im told doing a fulll stainless sys that is bit by bit interchangeable with the standard, so you dont need to replace all in one go..... ill be looking at this verrrry soon.

and please keep us all informed. :ok

Phredd

Re: Exhaust Dilemma.... Go stainless???

Posted: 28 Feb 2009, 15:07
by windysurfer
Brickwerks are indeed doing stainless

http://www.brickwerks.co.uk/index.php?o ... 3&Itemid=6

Not got one myself but have heard only positive feedback from people on BY who have fitted them. :ok

Re: Exhaust Dilemma.... Go stainless???

Posted: 01 Mar 2009, 10:48
by wasserleaker
Thanks for the replies,
going to weld a patch on the crack to get it thru the MOT this week, then after payday decide which stainless one to go for, the brickwerks system looks great, not keen on keeping the cast 'knuckle' though. looks very much like the bluebird customs system.
the JP system also looks great, ........decisions, decisions!