Club 80-90 Forums

I have been looking at weller wheels but i have no idea what type, size or car to look at. Seen some off of a toyota, what pcd et etc do they have??????

Hi Pep,
got white wellers on my two buses. standard 14 inch 5 stud pattern. Duuno about pcd, but they went on no problems! I love em so much that my Beetle has a set on too!!!

Em
x

Do you know what car they are off? I have seen a couple of sets one for landrover one for toyota pick up.

Neither Toyota or Landrover any use I am afraid,
You need 112x5,and an offset (ET) 30-40 look here

http://www.carlsalter.com/wheel_fitments.html" onclick="window.open(this.href);return false;

and here

http://www.brick-yard.co.uk/VehicleSpec ... ltwhls.htm" onclick="window.open(this.href);return false;

They do come up in 14" quite a lot,A guy over on brickyard ended up throwing a set away in the summer as no one was interested.

Peronally its got to be slotmags

Good luck

i struggled for ages trying to find a set of wheels that weren't kerbed or didn't have old tired tyres on them.

It's not so much the PCD you'll struggle finding, it's getting the centres big enough that they'll go over the spigot in the centre of the wheel(this is what your wheels locate on for alignment), you'll either have to stick with VW specific or get the middles machined out, or go for Merc Vito(Van) wheels as these fit the bill perfectly except you'll need a 5mm spacer for the fronts.

check your insurance too, as mine insisted that i had the correct "load rated" tyres on which meant a set of Audi TT alloys with car tyres on would not be upto the job and if they'd of checked it out i would not of been covered if the worst had happened

I found brand new 17" AMG replicas on Ebay for £400 with brand new 225/45/17 tyres on. Rolling diameter is the same so no need to worry about your speed being wrong.... not that you can break many speed limits in a bus

happy hunting

Brad

not that you can break many speed limits in a bus

OH YES YOU CAN!!!

i think you can still get them new. what about a set of 16" syncro wheels, i recon they would look good with some chrome wheel nuts.

Peps...the two sets I got were advertised as from vw camper.

Bolted straight on. No spacers, no machining. ok...tyres sh!t...but only paid £40 for one set, £30 for the second set, and got the Beetle set for £2o or sommat rediculous,,,and that was with 3 decent tyres too. The fourth was flat...but was sorted at the tyre place for a tenner! I masked off the red an blue lines on the rim and painted them as well...so they look nice and fresh.

ps...if anyone just has a one off I could use a spare...

ta

Em
x

Thats the sort of thing i want Emma really cheap! would then spend money on powder coating.

Andy whay do syncro wheels look like?

err! round! seriosly though, have a look on the 4wd site here, a few years ago fluff and i went to a meet nr coventry, i saw a carvelle there with a pair of syncro wheels on the back. no caps, and a pair of standard wheels on the front. for me it was the best looking bus i had seen, and still is. it was owned by a guy who goes on brickyard called germman. i have since seen pics of it in mags and it now has some huge alloys on it i loved it the way it was.

Im looking for wellers too, not in a hurry but interested in a change
can you use the standard steel as a spare or will you need a 5th weller?

Peps good luck with the search, if you get some and her of any more can you PM me

thanks
irishkeet

I have emailed
http://www.wellerwheels.com" onclick="window.open(this.href);return false;

will post info if i get any

i got mine off matt n torz on here nice and cheap (thanks again guys) and then dropped on some brand new extra load van tyres for a tenner each fitted which are supple modern grippy tyres that actually work on wet muddy grass.
i love me wellers

hi rozzo
can you post a pic of yours be good to see them on a high top
thanks
keet