Page 1 of 3
Your snowy sunday syncro challenge.
Posted: 12 Mar 2006, 10:35
by Simon Baxter
How do.
here, Im bored of putting syncros on the ramp at work and seeing 3 holes drilled into the left hand front wheel arch where the puch badge has been removed/dropped off from.
So, if anyone has one still in their possesion could they measure it's diameter and a quick photo because I may have a solution for you.
It's not a sticker and it won't be a replica of what should be there, just something to tidy the holes up...
Cheers!
Simon.
Posted: 12 Mar 2006, 10:50
by HarryMann
Willdo
Posted: 12 Mar 2006, 19:22
by HarryMann
OD 43mm
Pins are not equidistant or equiangle.
They're an isosceles triangle
Two level at the top and one directly below at the midpoint of those two..
Top one are 28.5mm apart
Lower one is 32mm below the line of the top two
All on a PCD of 37mm
Pictures to follow
Posted: 12 Mar 2006, 19:38
by Simon Baxter
Cheers.
O/D was what was needed.
Back soon...
Posted: 12 Mar 2006, 21:09
by Simon Baxter
So, if I were to get some stainless steel laser etched puch badges like so...
would anyone want them?
Posted: 12 Mar 2006, 21:22
by HarryMann
Yes, I would want a couple and the great thing is, they wouldn't get nicked!
The dark grey is normally etched, like this photo I'm still waiting for...
Posted: 12 Mar 2006, 21:26
by JennyTyger
Posted: 12 Mar 2006, 21:58
by HarryMann
Oops! As if by magic
Posted: 12 Mar 2006, 22:07
by Simon Baxter
Well, I've sent him the design, just waiting to hear back.
Probably attach with double sided foam tape.
Posted: 13 Mar 2006, 08:44
by bigbluebus
I'll prob have a couple if they aren't silly money
(which I doubt they will be
)
Posted: 13 Mar 2006, 19:40
by Ray
me too
Ray
2.1 dj syncro
#0094
Posted: 13 Mar 2006, 20:25
by Mercdoctor
Put me down for four please.......
look nice on our two golf syncros.....................
Posted: 13 Mar 2006, 23:26
by missusjen
mercdoctor wrote:This Syncro van is eating my life away
But don't you love it........
Posted: 13 Mar 2006, 23:38
by andylen
Mine has got 2 rings one with styer and the other puch joined up like audi rings
Posted: 14 Mar 2006, 00:31
by HarryMann
Then let's see a good straight on photo please Andy...
